 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MASWSS0201 GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Features * * * * * * * * * * * * Ideal for CATV, DTV, DVR, STB Applications Default-On in Unpowered State (RFC-RF1 Path) Broadband Performance: DC-2.5 GHz Low Insertion Loss: 1.1 dB at 1 GHz High Isolation: > 60dB @ 100MHz Single Control Operation Power Handling: > 20 dBm P1dB Lead-Free 3 mm 12-lead PQFN Package 100% Matte Tin Plating over Copper Halogen-Free "Green" Mold Compound RoHS* Compliant and 260C Reflow Compatible Configurable for Non-terminated Operation Rev. V1 Functional Schematic Description M/A-COM's MASWSS0201 is a broadband GaAs PHEMT MMIC SPDT terminated switch in a low cost, lead-free 3 mm 12-lead PQFN package. The MASWSS0201 is ideally suited for applications where an unpowered on state is critical in a single control line SPDT terminated switch. The unpowered condition is the same as the VC = 0 condition. This part can also be configured as a reflective switch with minimal impact to the RF performance. The MASWSS0201 delivers high isolation, low insertion loss and high linearity up to 2.5 GHz. The MASWSS0201 is fabricated using a 0.5 micron gate length GaAs E/D PHEMT process. The process features full passivation for performance and reliability. Pin Configuration 2 Pin No. 1 2 3 4 5 6 7 8 9 10 Pin Name N/C RF1 Term 1 GND GND N/C GND Term 2 GND RF2 VC GND RFC GND Paddle 4 3 3 Description No Connection RF Port 1 Termination 1 Ground Ground No Connection Ground Termination 2 Ground RF Port 2 Control Ground RF Input Ground RF and DC Ground Ordering Information Part Number MASWSS0201TR-3000 MASWSS0201SMB 1 11 Package 3000 piece reel Sample Test Board (Includes 5 Samples) 12 13 1. Reference Application Note M513 for reel size information. 2. M/A-COM recommends that all unused (N/C) pins be connected to ground. All data on this datasheet was taken with N/C pins connected to ground. 3. Terminated grounds require DC blocking capacitors; see application schematic. 4. The exposed pad centered on the package bottom must be connected to RF and DC ground. * Restrictions on Hazardous Substances, European Union Directive 2002/95/EC. 1 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0201 GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Electrical Specifications: TA = 25C, Z0 = 75 , VC = 0 V/3 V, PIN = 0 dBm 5 Parameter Insertion Loss RFC to RF1 (VC = 0V) Insertion Loss RFC to RF2 (VC = 3V) Rev. V1 Test Conditions 100 MHz 1.0 GHz 2.0 GHz 100 MHz 1.0 GHz 2.0 GHz 100 MHz 1.0 GHz 2.0 GHz (RFC - RF1) 2.0 GHz (RFC - RF2) DC - 2.0 GHz Two Tone, +5 dBm/Tone, 10 MHz Spacing 100 MHz 1.0 GHz Two Tone, +5 dBm/Tone, 10 MHz Spacing 100 MHz 1.0 GHz 100 MHz 1.0 GHz 10% to 90% RF 90% to 10% RF 50% control to 90% RF 50% control to 10% RF -- VC = 3V Units dB dB dB dB dB dB dB dB dB dB dB dBm dBm dBm dBm dBm dBm S nS S nS mV A Min. -- -- -- -- -- -- 60 40 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Typ. 0.9 1.0 1.3 1.0 1.2 1.5 65 45 38 43 25 54 / 51 / 53 72 / 70 / 70 38 / 38 / 39 41 / 44 / 44 21 / 21 / 22 29 / 28 / 29 1.4 12 1.6 12 550 250 Max. 1.75 1.85 -- 1.65 1.85 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 500 Isolation Return Loss IIP2 (VC = 0V / 3V / 5V) IIP3 (VC = 0V / 3V / 5V) Input P1dB (VC = 0V / 3V / 5V) T-rise T-fall Ton Toff Transients Control Current 5. Electrical specifications apply to terminated configuration only. Absolute Maximum Ratings 6,7 Parameter Input Power @ 100 MHz Input Power @ 1 GHz Operating Voltage Operating Temperature Storage Temperature Truth Table 8,9,10 Control VC 0 1 Absolute Maximum +22 dBm +29 dBm +8.5 volts -40C to +85C -65C to +150C RFC-RF1 On Off RFC-RF2 Off On 8. External DC blocking capacitors are required on all RF ports. 9. 0 = 0 0.1 V, 1 = +2.9 V to +5 V. 10. The unpowered on state is the same as VC=0. 6. Exceeding any one or combination of these limits may cause permanent damage to this device. 7. M/A-COM does not recommend sustained operation near these survivability limits. 2 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0201 GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Insertion Loss 0.0 RFC to RF1 (Vc=0V) Rev. V1 Typical Performance Curves: TA = 25C, Z0 = 75 , Components per Application Schematic RFC Return Loss 0 RFC to RF1 (Vc=0V) -0.5 RFC to RF2 (Vc=3V) -10 RFC to RF2 (Vc=3V) -1.0 -20 -1.5 -30 -2.0 -40 -2.5 -3.0 0.0 -50 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Isolation (Below 200 MHz) -40 RFC to RF1 (Vc=3V) RF1 Return Loss 0 RF1 to RFC (Vc=0V) -50 RFC to RF2 (Vc=0V) -10 RF1 Terminated (Vc=3V) -60 -20 -70 -30 -80 -40 -90 25 50 75 100 125 150 175 200 225 250 -50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (MHz) Frequency (GHz) Isolation (Above 200 MHz) -20 RFC to RF1 (Vc=3V) RF2 Return Loss 0 RF2 to RFC (Vc=3V) -30 RFC to RF2 (Vc=0V) -10 RF2 Terminated (Vc=0V) -40 -20 -50 -30 -60 -40 -70 0.0 -50 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 3 Frequency (GHz) Frequency (GHz) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0201 GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Lead-Free 3 mm 12-lead PQFN Rev. V1 Reference Application Note M538 for lead-free solder reflow recommendations. Meets JEDEC moisture sensitivity level 1 requirements. Application Schematic 11,12 C1-C5=10000 pf C6=100 pf Qualification Qualified to M/A-COM specification REL-201, Process Flow -2. Handling Procedures Please observe the following precautions to avoid damage: Static Sensitivity Gallium Arsenide Integrated Circuits are sensitive to electrostatic discharge (ESD) and can be damaged by static electricity. Proper ESD control techniques should be used when handling these devices. M/A-COM's AN3007 Application Note outlines a method for ESD sensitivity mitigation. It can be found at the Tech/Apps section of the MACOM.COM website. 11. Non-connected pins (P1 and P5) are shown connected to ground as recommended. All data on this datasheet was taken with N/C pins connected to ground. 12. Application schematic shown is for terminated configuration. For non-terminated operation Term 1 and Term 2 ground pins are left open. See application section for data in unterminated configuration. 4 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0201 GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Application Section Typical Performance Curves: TA = 25C, Z0 = 75 , Unterminated Configuration (Term 1&2 GND pins open) Insertion Loss 0.0 RFC to RF1 (Vc=0V) Rev. V1 RFC Return Loss 0 RFC to RF1 (Vc=0V) -0.5 RFC to RF2 (Vc=3V) -10 RFC to RF2 (Vc=3V) -1.0 -20 -1.5 -30 -2.0 -2.5 -40 -3.0 0.0 -50 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (GHz) Frequency (GHz) Isolation (Below 200 MHz) -40 RFC to RF1 (Vc=3V) RF1 Return Loss 0 -50 RFC to RF2 (Vc=0V) -10 RF1 to RFC (Vc=0V) RF1 Unterminated (Vc=3V) -60 -20 -70 -30 -80 -40 -90 25 50 75 100 125 150 175 200 225 250 -50 0.0 0.5 1.0 1.5 2.0 2.5 3.0 Frequency (MHz) Frequency (GHz) Isolation (Above 200 MHz) -20 RFC to RF1 (Vc=3V) RF2 Return Loss 0 -30 -10 RFC to RF2 (Vc=0V) RF2 to RFC (Vc=3V) RF2 Unterminated (Vc=0V) -40 -20 -50 -30 -60 -40 -70 0.0 -50 0.5 1.0 1.5 2.0 2.5 3.0 0.0 0.5 1.0 1.5 2.0 2.5 3.0 5 Frequency (GHz) Frequency (GHz) ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. MASWSS0201 GaAs Broadband 75 Ohm Default-On, SPDT Terminated Switch DC - 2.5 GHz Application Section Application Schematic - Unterminated Configuration C1-C3 = 10000 pf C4 = 100 pf Rev. V1 6 ADVANCED: Data Sheets contain information regarding a product M/A-COM Technology Solutions * North America Tel: 800.366.2266 / Fax: 978.366.2266 is considering for development. Performance is based on target specifications, simulated results, * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 and/or prototype measurements. Commitment to develop is not guaranteed. * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 PRELIMINARY: Data Sheets contain information regarding a product M/A-COM Technology Visit www.macomtech.com for additional data sheets and product information. Solutions has under development. Performance is based on engineering tests. Specifications are typical. Mechanical outline has been fixed. Engineering samples and/or test data may be available. M/A-COM Technology Solutions Inc. and its affiliates reserve the right to make Commitment to produce in volume is not guaranteed. changes to the product(s) or information contained herein without notice. |
Price & Availability of MASWSS0201
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |